Volvo XC60 CD Slot Phone & Garage Remote Holder - image

Files (3)

cdslot.stl

STL

88.1 KB

cradle.stl

STL

14.8 KB

remote.stl

STL

28.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 38%	100% solid	Recommendation
cdslot.stl	Printable file	88.1 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
cradle.stl	Accessory piece	14.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
remote.stl	Printable file	28.6 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Volvo XC60 CD Slot Phone & Garage Remote Holder

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Designed this phone holder for my Volvo XC60's cd slot, also has a remote holder for the garage gate. My phone (Huawei P20 Pro) has a cover and so the design includes the size for the cover as well. I have used PETG filament so that the summer heat will have little effect. Phone& Remote Cradle infill -> 100% Rest infill -> 25%.