Volvo XC60 switch and tablet mount - image

Files (1)

Switch_Mount.stl

STL

194.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Switch_Mount.stl	Mount / bracket	194.8 KB STL	Slice file	Slice file	Slice file	Verify support generation in your slicer for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Volvo XC60 switch and tablet mount

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this to allow my kids to play the switch in the back seat of my wife's 2018 Volvo XC60. It slides into the rear "change holder." Just pull the rubber liner out and drop it in. It was made to fit the ball mount on this headrest mount. https://www.amazon.com/gp/product/B0798NNVZJ/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 Supports are needed.