Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| XC70-Handle-v1.0.stl | Primary model | 405.6 KB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Volvo XC70/V70 trunk/luggage compartment lock handle
Shared by
Michael ChenDescription
This is replacement for handle used in medkit/fuse side cover in trunk/luggage compartment of Volvo XC70 (2006) and V70 - probably also for other years - but it's tested with this one only. Original part is braking quite easily, and that's why my - second hand - Volvo had all of them broken when I got it. Replacement is 15-20EUR + shipment, so... :) This replacement is not made exactly like the original one - I've tried to make it more sturdy, but fits as a replacement. Visible part should have exactly the same size. Because I also had no original springs for it, I've made a small hole in hook to use standard, straight springs - it's working :) (see picture).
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
