Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

VW engine case spliter

0 downloads46 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

A simle tool to split aircooled Volkswagen engine cases. You will need a 3/8 bolt nut and washer. The bolt length is about 1 3/4" long. Trim down a 2" bolt a hair to get the maximum separation. Place in the oil pump recess of your engine case and tourqe the nut unitll the case is split. Easy as that. EDIT: I added a second file of the same model with an extended bolt hole for little more pushing distance.