Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

VW Golf IV TDI front grill badge logo

0 downloads47 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

To mount this badge on your car you will need to glue in two 1mm copper or aluminum rods/wires (around 25cm each) as shown on the second photo, in order to wrap around the wires later inside the grill supports to fix it permanently. I also suggest You sanding and painting it the color You like before the install. (in my opininion every letter in red is perfect because it means the top end ARL TDI engine under the hood).