VW Golf MK4 Switch Panel Smartphone Mount with 17mm ball - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

VW Golf MK4 Switch Panel Smartphone Mount with 17mm ball

0 downloads46 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I wanted to use the Smartphone Mount from Wellenbrecher, but the ball did not fit my smartphone holder. So I added an 17mm ball with tinkercad. File: switch_panel_mount_17mm.stl To print this, a lot of supports is required. Update: Because I don´t like supports, I have made a two piece design. Print the files switch_panel_mount_17mm_2piece_left.stl or switch_panel_mount_17mm_2piece_right.stl without any supports. Use a screw M3x16 to connect the parts.