VW Polo MK6 >2017 AW Armrest Height Adjuster - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 30%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

VW Polo MK6 >2017 AW Armrest Height Adjuster

0 downloads44 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is armrest height adjuster wedge designed for vw polo mk6 armrest. After i purchased my new polo i can not grab the shift knob while resting my arm and i designed this. I saw something like this on a website about 15 euros and it was very bad design. Have fun while using this thing. This thing has its own bending point for snaping it on. And it is very strong even for 5mm design(it is 25mm). I prefer PETG filament for heat resistance but i thing it should be just fine with PLA. And I prefer %30 infill. It is one piece by the way. Place this with the right way. I thing you can figure it out. I painted my armrest adjuster after printing for better surface quality with acrilic paint and i used 500 grid sandpaper after paint dried. After all i sprayed varnish for better quality. However you can use it after taking it out from the bed. I will add photos of mine later.