Files (1)

Cupholder_STL.stl

STL

290.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

19g

Based on 25% main infill across listed model files

Material cost

$0.45

Filament only at roughly $24/kg PETG / ASA

Print time

32m–54m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cupholder_STL.stl	Mount / bracket	290.7 KB STL	17g $0.42	19g $0.45	41g $0.99	Print the holder upside-down for a smooth top surface

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

VW Scirocco 3 cupholder

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I used the cupholder from RobRS2 to recreate a holder for scirocco 3. You can print the holder upsidedown as provided for a smooth top surface. In addition you should print the notches and glue them on the top because I printed with offset to lay flat on the heatbed.

Compatible Cars

Volkswagen Scirocco

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Hans Peter (Phrilten) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.