VW Sharan Cache lave phare / Headlight lava cover - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

VW Sharan Cache lave phare / Headlight lava cover

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I lost my cover for the headlight lava of my Volkswagen Sharan (>2015). So I spent time to re-design one in order to 3D print it. The third version was the good one. Printed in PLA with wide 0.4 and thickness 0.25 mm and with support. Paint and vernish with bomb painting. I sand it but not enough and perhaps I should used some mastic filler before painting it. The STL is the right version but use a miror operation on your favorite slicer to get the left ones. Enjoy this complicated model. Don't hesitate to let me tips!;-).