Files (3)

VW_T5_Blank_Double_Badge.stl

STL

139.9 KB

VW_T5_Switch_Blank.stl

STL

42.7 KB

VW_T5_Switch_Blank_RHS.stl

STL

122.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VW_T5_Blank_Double_Badge.stl	Printable file	139.9 KB STL	Slice file	Slice file	Slice file	Check orientation and supports in your slicer before printing
VW_T5_Switch_Blank.stl	Printable file	42.7 KB STL	Slice file	Slice file	Slice file	Check orientation and supports in your slicer before printing
VW_T5_Switch_Blank_RHS.stl	Printable file	122.5 KB STL	Slice file	Slice file	Slice file	Check orientation and supports in your slicer before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

VW T5 Switch Blank

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a modified version of the blanking plate designed by ChristofSchwiening. I included the chamfer on the front face so it looks more like the OEM covers, also adjusted some dimensions as i found it didn't quite fit properly. I printed this part in PET-G and PLA with no support. V2 - Added a VW emblem to the blank, this means it is only suitable for the right hand side (I used the mirror function in Cura to print the 'left' version) V2 - Also added a "double" sized blank with the badge.