Files (1)

VW_Transporter_T5_Blank_Dashboard_.stl

STL

17.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VW_Transporter_T5_Blank_Dashboard_.stl	Primary model	17.7 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

VW Transporter T5 Blank Dashboard

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This study is based on the VW T5 dashboard blank of the user named Tafka. emerged with the development. Due to the thin wall thickness, it breaks easily. For this reason, the wall thicknesses were increased. The printed part actually fits tighter than the original. Switch designs for the camera are in progress. Good work.