Files (2)

trunklight1.stl

STL

168.1 KB

trunklight2.stl

STL

248.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
trunklight1.stl	Printable file	168.1 KB STL	Slice file	Slice file	Slice file	Ensure proper cooling for the PETG or ASA print
trunklight2.stl	Printable file	248.0 KB STL	Slice file	Slice file	Slice file	Ensure proper cooling for the PETG or ASA print

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

VW trunk light

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I didn't like the hole in the tailgate for the emergency triangle we don't get included with the car here in Canada so I built an LED light to fit in there. Used an LED strip on each side and a sanded piece of PETG for the diffuser took apart an old battery holder for the metal parts. the switch hole isn't ideal as you need to lower the bracket to turn it on. I may revisit in the future.