VW up! 1.0 Adapter für Handy-Halterung (z.B. Brodit 711083) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

VW up! 1.0 Adapter für Handy-Halterung (z.B. Brodit 711083)

0 downloads36 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Adapter für die integrierte Navi-Halterung (VW Teilenummer 150 035 936 A) des VW Up! 1.0 Passend z.B. für Brodit 711083 Passiv Holder mit Drehfuß für Apple iPhone Befestigung auf dem 3D-Druck Teil: mittels selbstschneidender Schrauben Je nach Kalibrierung des 3D Druckes müssen die Passmulden noch mit der Feile etwas nachgearbeitet werden. Remix von https://www.thingiverse.com/thing:4214708