← Back to Browse Parts
VW Up! v baseplate - image

Files (1)

V-Base.stl
STL
1.6 MB
Print guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
1 model file
Recommended kit
37g

Based on 25% main infill across listed model files

Material cost
$0.89

Filament only at roughly $24/kg PETG / ASA

Print time
1.1h–1.8h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL fileRoleSource sizePETG / ASA 20%PETG / ASA 25%100% solidRecommendation
V-Base.stlPrimary model1.6 MB STL
34g
$0.82
37g
$0.89
82g
$1.96
Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

VW Up! v baseplate

0 downloads42 views0 likes
3DPrintedCarPart logo
Verified

Description

Made some openings where the mount grips this plate. I found it easier this way to grip on the mount and get it attached/detached.

Compatible Cars

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Raja Ha (Raja046) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.