VW Up! Universal dashboard mount (2014) - image

Files (1)

upHalter2.stl

STL

1.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
upHalter2.stl	Primary model	1.3 MB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

VW Up! Universal dashboard mount (2014)

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a universal adaptor for the VW Up's original GPS dashboard mount. I am not sure if the versions are different, but this was made for my girlfriends 2014 model. It doesn't shake around and clicks in place easily. The release mechanism works fine! This thing only includes the mounting plate / adaptor since the phone mount (which is glued to it on the photo) was made for a very specific phone case. Feel free to use this as a base for a remix or to add your own phone mounts to it!