Files (1)

vw_w_emblem_not_tilted.obj

OBJ

40.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
vw_w_emblem_not_tilted.obj	Primary model	40.1 KB OBJ	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

VW W emblem

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Made this in fusion 360 by taking measurements of a emblem my brother found at the scrapyard and didnt see any models of it online so i thought that why not give it a try, so here is the emblem, doesn't look as good as i expected because i could not find a way to make the grooves have a nice v-shape about 1 mm deep but who looks at the tiniest detail when its a fairly small print/emblem?:).