Files (1)

Shift_Knob_Subaru_Weighted.stl

STL

1.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Shift_Knob_Subaru_Weighted.stl	Primary model	1.1 MB STL	Slice file	Slice file	Slice file	Print with a brim or raft for improved adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Weighed Subaru shift knob

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Remix of M12 Shift Knob by flyinpnw. Dropped some small washers and glued everething with epoxy to add weight. It turned out to be 140 grams. Use tree supports for top part of the shifter (ball), everything else should print nicely. Print with PETG for heat resistance. Orientation is wrong, just place it flat:).