Shifter Knob Spacer for Manual Transmission (Subaru Impreza 2007) - image

Files (2)

Shift_Knob_Spacer.stl

STL

701.3 KB

Shift_Knob_Spacer_v1.step

STEP

23.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Shift_Knob_Spacer.stl	Printable file	701.3 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the build plate to prevent warping
Shift_Knob_Spacer_v1.step	Accessory piece	23.1 KB STEP	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Shifter Knob Spacer for Manual Transmission (Subaru Impreza 2007)

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I replaced the stock shift knob in my 07 Subaru Impreza with this pearloid ball. I needed a way to cover the threads for the shifter shaft as well as hold up the boot, so I made this. I would imagine this will work for other cars as well, but your mileage may vary. It should fit on any shifter that uses 1/4-20 threads. If you try it for another car please comment for reference for myself and others!