Files (3)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| BrakeButton.stl | Printable file | 1.9 MB STL | 37g $0.89 | 40g $0.97 | 89g $2.13 | Ensure a strong bond between the print and the build plate to prevent shifting during printing |
| BrakeButton_Hex.stl | Printable file | 1.9 MB STL | 37g $0.89 | 40g $0.97 | 89g $2.13 | Ensure a strong bond between the print and the build plate to prevent shifting during printing |
| BrakeButton_v13.step | Printable file | 254.9 KB STEP | 17g $0.40 | 18g $0.43 | 39g $0.95 | Ensure a strong bond between the print and the build plate to prevent shifting during printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Hand Brake Button for Subaru Impreza 2007
Shared by
3DPrintedCarPartDescription
This button replaces the stock chrome one that is in the 2007 Subaru Impreza Outback Sport. The chrome on mine was peeling, so I replaced it with this. To remove the old one, simple grip it tightly and unscrew with vise grips or pliers (careful not to damage the surrounding leather). This one screws onto the same shaft; depending on your print tolerances, it may be very difficult to turn. If that's the case, try printing the hex-head version and use a 5mm hex key to tighten it into place.
Compatible Cars
Originally published on thingiverse.com by Bradley Jesteadt (bradstopher99) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
