Files (2)

Bottom_of_shifter_blank.stl

STL

806.5 KB

Top_of_shifter_blank.stl

STL

657.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Bottom_of_shifter_blank.stl	Printable file	806.5 KB STL	Slice file	Slice file	Slice file	Use a threaded insert or a nut for added security if the printed thread is a concern
Top_of_shifter_blank.stl	Printable file	657.7 KB STL	Slice file	Slice file	Slice file	Use a threaded insert or a nut for added security if the printed thread is a concern

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Weighted Gear knob

0 downloads62 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a gearknob I made for a 1994 civic eg (M10x1.5) however the.ipt files are uploaded so you can edit to your needs. The.stl dimensions are 90mm x 31.2mm. The bottom part features a hollow centre, I filled this with Lead shot I got from Ebay, I havn't weighed the shifter but it feels much nicer to shift than just solid printed one. The printed thread to mount to the car actually worked really well I had considered a nut or a threaded insert but so far so good.