Wheel center cap for Mini Cooper vehicles - image

Files (7)

Copy_of_Copy_of_Mini_Cooper_logo.stl

STL

145.6 KB

Mini_Cap.stl

STL

313.6 KB

Mini_Cap_Cover_Skull.stl

STL

990.1 KB

Mini_Cooper_logo.stl

STL

102.3 KB

Mini_Logo_embedded.stl

STL

380.8 KB

Transformers_Autobots_Wheel_Cap-3.stl

STL

49.4 KB

Transformers_Autobots_Wheel_Cap-6.stl

STL

165.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

7 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Copy_of_Copy_of_Mini_Cooper_logo.stl	Printable file	145.6 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping in outdoor conditions
Mini_Cap.stl	Cover / cap	313.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Mini_Cap_Cover_Skull.stl	Cover / cap	990.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Mini_Cooper_logo.stl	Printable file	102.3 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping in outdoor conditions
Mini_Logo_embedded.stl	Printable file	380.8 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping in outdoor conditions
Transformers_Autobots_Wheel_Cap-3.stl	Cover / cap	49.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Transformers_Autobots_Wheel_Cap-6.stl	Cover / cap	165.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Wheel center cap for Mini Cooper vehicles

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I've changed the size of the original file to fit my GB rims, The diameter is now 64,8mm and the height is 17,5mm. Will add some pictures of it on the car. Also created a caps to glue on: - Human skull cap - Mini Logo cap - Mini text embedded cap.