Wheel Centre Cap for Mini Cooper Vehicles - image

Files (4)

MCS.stl

STL

3.5 MB

Mini_Auto_Cover.stl

STL

244.0 KB

Mini_Cap.stl

STL

313.6 KB

Mini_Cover.stl

STL

87.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
MCS.stl	Printable file	3.5 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Mini_Auto_Cover.stl	Cover / cap	244.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Mini_Cap.stl	Cover / cap	313.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Mini_Cover.stl	Cover / cap	87.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Wheel Centre Cap for Mini Cooper Vehicles

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Centre Cap for Classic Mini "Minilite" alloys. Suitable for RSP Cooper, Thirty, Itallian Job, Mainstream Cooper etc. There are three files, a plain centre cap plus two variant covers which can be glued to the cap if required. I have also added a Mini Club Sussex logo badge, for the guys and girls in my old club.