Window Glass Hammer Headliner Hanger - image

Files (2)

safety_hammer_hanger_-_BLANK.stl

STL

55.4 KB

safety_hammer_hanger_-_TRD.stl

STL

83.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
safety_hammer_hanger_-_BLANK.stl	Printable file	55.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the print and the headliner to support the weight of the hammer
safety_hammer_hanger_-_TRD.stl	Printable file	83.5 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the print and the headliner to support the weight of the hammer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Window Glass Hammer Headliner Hanger

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This bracket is designed to hold a window glass hammer on the headliner so it is easily accessible in the event of an emergency. The mount was designed to attach to the bottom of the dome light without damaging the headliner or needing any holes drilled. This was designed and tested on a 2016 Toyota Tacoma, but may work on other vehicles. This is the hammer I used: https://www.amazon.com/gp/product/B01A9Z9MFE/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1