Wischwasserbehälterspritzkappe Ford Focus Cmax - image

Files (1)

Spritzwasserkappe_FordCmax.stl

STL

54.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Spritzwasserkappe_FordCmax.stl	Primary model	54.2 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for outdoor use

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Wischwasserbehälterspritzkappe Ford Focus Cmax

0 downloads98 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A "Wischwasserbehälterspritzkappe" (dont you love the german language?:) ) replacement -part of the broken cap for the wiping-water-tank-cap of our Ford Focus Cmax. V3 - fits and snaps shut! USE PETG! PLA wont last! update after a very hot summer of 2019. The PETG-PArt still hold up, but the thinner part is bent a little and the cap doesnt snap shut anymore, but still stays in place. Not perfect - but allright for my needs.