Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

WRX 15+ Trunk Handle

0 downloads49 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This was based on my 2016 WRX. It will probably fit the entire 2015-2018 WRX generation, including the STI. Might also fit other late model Subaru vehicles that might utilize the same trunk latch. I will find out what size bolts are needed and put it here later... M5 or M6 (from memory) maybe. Socket cap bolt. Just at 10mm to the length. There are inset areas on the ends for washers. Again, I'll double check and have the info here later.