Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| WRXtrunkHANDLE.stl | Primary model | 215.8 KB STL | 16g $0.38 | 17g $0.41 | 37g $0.89 | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
WRX 2015+ Trunk Handle (w/ Logo)
Shared by
3DPrintedCarPartDescription
srwall's design was one of my first downloads on here as it was something I really wanted for my car and I thank him for it and his hard work. Unfortunately the area where the cylinders connected to the handle was designed in such a way that it was perforated and the cylinders broke off with the lightest touch. I added material to the perforated area and added the WRX font logo. I printed these in 2 separate prints to easily make it dual color. The logo didn't fit right after printing. I soaked the black parts in hot water to shrink them slightly then snapped apart the R&X and glued them all in. The replacement bolts I used are two 6mm x 30mm metric socket head cap screws.
Compatible Cars
Originally published on thingiverse.com by Chris Rowe (Ninety8NeonACR) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
