Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
WRX Air Vent Guide
Shared by
3DPrintedCarPartDescription
The metal insert in the central air vents in the Subaru WRX (2006) can fall out and become lost. This is what happened in our case, one guide got lost. I needed to replace the missing air vent guide. The shiny metal was out of character with the rest of the dash, so decided to 3D print a replacement for both the air vents, making them the same. They were printed in a matching silver grey colour. My print is made in PLA 1.75mm Prusa silver filament, with 0.05mm layer height and 100% infill on a PRUSA I3 MK3S printer. I hope you can find this print useful, too.
Compatible Cars
Originally published on thingiverse.com by Daniel Soussi (wisestone) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
