04-08 F-150 Gear Shifter Dust Cover boot/plate replacement - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 35% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / TPU

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / TPU 20%	PETG / TPU 35%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

04-08 F-150 Gear Shifter Dust Cover boot/plate replacement

0 downloads778 views0 likes

Download at source

Shared by

Alfred

Verified

Description

My 06 F-150 Lariat dust cover around my gear shifter broke and the only replacement options are to buy a grimy old used gear shifter assembly for $150-$200 or a new one for $300. This wasn't an option for me as it shifts fine, it just didn't have the dust cover to keep out dust, crumbs, etc. I cut off my old one and put this one on. I used a little bit of orange electrical tape to keep the indicator orange as opposed to whatever color filament it's printed in. Printed in PETG and TPU. Highly prefer the TPU for the durability of the little feet to keep it in the track over PETG, but PETG did indeed work for me just as well.