Speaker Adaptor Plate for a 2007 Ford F150 - image

Files (1)

F150_Speaker_Adaptor_Plate.stl

STL

131.8 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
F150_Speaker_Adaptor_Plate.stl	Primary model	131.8 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper fitment with the speaker and the Ford's 6x8 locations

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Speaker Adaptor Plate for a 2007 Ford F150

0 downloads206 views0 likes

Shared by

Michael Chen

Verified

Description

Uploaded a new photo that was shot on 4/5/2020. The adaptor has been installed for 6 years and was printed in PETG. It looks to be a little warped, but not too bad after enduring 3 Indiana and 3 Tennessee summers! I wanted to install some 6.5" round speakers into the Ford's 6x8 locations and couldn't find a suitable adaptor plate. The hole is sized for a Goldwood GW-6024 6-1/2" woofer: http://www.parts-express.com/pe/pshowdetl.cfm?&Partnumber=290-351 These woofers have a frequency response of 29 to 4,800Hz, so obviously you will need to substitute a full range speaker or add tweeters. My truck doesn't have any door location for tweeters, so I'll be installing them either in the upper portion of the door (defrost vent area) with a "waveguide" to direct the sound to the windshield or in pods close to the a-pillar.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

2007 Ford F 150

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.