1.4 turbo Dart Bov diverter adapter - image

Files (2)

Diverter_bloww_off_1-3.stl

STL

5.1 MB

Diverter_bloww_off_1-4.stl

STL

5.6 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	Polycarbonate / high-temperature resistant materials like PEEK / PEI 20%	Polycarbonate / high-temperature resistant materials like PEEK / PEI 90%	100% solid	Recommendation
Diverter_bloww_off_1-3.stl	Printable file	5.1 MB STL	Slice file	Slice file	Slice file	Ensure proper cooling and ventilation to prevent overheating
Diverter_bloww_off_1-4.stl	Printable file	5.6 MB STL	Slice file	Slice file	Slice file	Ensure proper cooling and ventilation to prevent overheating

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

1.4 turbo Dart Bov diverter adapter

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

i made a 3d model of a electronic diverter valve, blow off plate for a dodge dart turbo 1.4 liter. the point of this is for your cars built up turbo pressure to blow off into atmosphere rather than recirculate through the diverter valve passage. i tested in many materials to include pla, abs, petg, nylon and PC. pla and abs melted rather quickly after the car warmed up no pressure was ever sent through. petg and nylon both stood up to just an ambient warm up. but once i boosted the car and released the throttle for the pressure release eureka we have the famous sound and boom a code and check engine light. the petg and nylon both deformed in different ways and locations but still could not stand up long term. i have revised the design and printed it finally out of Poly carbonate filament. 2 days running in my daily commute with no deformations or issue set to the computer on board the vehicle. will update and post further pictures if necessary.