Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
100 Series Landcruiser Light Weight Roof Rack Mount
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Shane Goodwin (ShaneGoodwin501)Description
Please Note: I have designed this bracket for the roof of my 100 Series Landcruiser purely just to mount a solar panel. If you use this to carry any weight, then you do so at your own risk my dudes! I print these brackets using 40mm/s with 50% infill and 8layer walls. This seems to give me the right strength. I print in PETG however I'm sure Nylon would be best. This bracket has been designed to mount a piece of 40x20x2 mm aluminium tube. Simply bold down the brackets at each side, place a piece of 1400mm tube between the two sides, drill a hole through the tube using the bracket as a guide, then bolt them down. This seems to allow for a little bit of flex in the chassis and stops and stresses forming. The brackets are angled at 10 degrees to match the curves of the roof. Links for building this in Australia: Good old Bunnings - Grab a snag for me while you're there. Bolts: https://www.bunnings.com.au/pinnacle-m5-x-65mm-stainless-steel-hex-head-bolts-and-nuts-6-pack_p0247307 Aluminium: https://www.bunnings.com.au/metal-mate-40-x-20-x-2mm-x-3m-aluminium-rectangle-tube_p1130547
Compatible Vehicles
Originally published on thingiverse.com by Shane Goodwin (ShaneGoodwin501) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
