Files (23)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| GRILL.stl | Printable file | 2.5 MB STL | 2g $0.05 | 2g $0.05 | 5g $0.12 | Ensure proper bed adhesion to prevent warping |
| HOOD.stl | Printable file | 2.9 MB STL | 2g $0.05 | 2g $0.06 | 5g $0.12 | Ensure proper bed adhesion to prevent warping |
| HOOD_NO_SCOOP.stl | Printable file | 28.5 MB STL | 5g $0.13 | 6g $0.14 | 13g $0.30 | Ensure proper bed adhesion to prevent warping |
| SCOOP.stl | Printable file | 726.7 KB STL | 1g $0.03 | 1g $0.03 | 3g $0.07 | Ensure proper bed adhesion to prevent warping |
| DRIVING_LIGHT_PANEL.stl | Printable file | 415.1 KB STL | 1g $0.02 | 1g $0.03 | 2g $0.05 | Ensure proper bed adhesion to prevent warping |
| HEADLIGHT_R.stl | Printable file | 956.8 KB STL | 1g $0.03 | 1g $0.03 | 3g $0.08 | Ensure proper bed adhesion to prevent warping |
| HEADLIGHT_L.stl | Printable file | 949.8 KB STL | 1g $0.03 | 1g $0.03 | 3g $0.08 | Ensure proper bed adhesion to prevent warping |
| BODY_1.stl | Printable file | 7.3 MB STL | 3g $0.08 | 4g $0.09 | 8g $0.19 | Ensure proper bed adhesion to prevent warping |
| BODY_3.stl | Printable file | 6.0 MB STL | 3g $0.07 | 3g $0.08 | 7g $0.17 | Ensure proper bed adhesion to prevent warping |
| DOOR_LF.stl | Printable file | 2.4 MB STL | 2g $0.05 | 2g $0.05 | 5g $0.11 | Ensure proper bed adhesion to prevent warping |
| DOOR_RF.stl | Printable file | 1.7 MB STL | 2g $0.04 | 2g $0.04 | 4g $0.10 | Ensure proper bed adhesion to prevent warping |
| DOOR_LR.stl | Printable file | 1.9 MB STL | 2g $0.04 | 2g $0.05 | 4g $0.10 | Ensure proper bed adhesion to prevent warping |
| DOOR_RR.stl | Printable file | 1.7 MB STL | 2g $0.04 | 2g $0.04 | 4g $0.10 | Ensure proper bed adhesion to prevent warping |
| DOOR_HANDLE_.stl | Printable file | 1.8 MB STL | 2g $0.04 | 2g $0.05 | 4g $0.10 | Ensure proper bed adhesion to prevent warping |
| MIRROR_R.stl | Printable file | 4.0 MB STL | 2g $0.06 | 3g $0.07 | 6g $0.14 | Ensure proper bed adhesion to prevent warping |
| TOP.stl | Printable file | 2.2 MB STL | 2g $0.05 | 2g $0.05 | 5g $0.11 | Ensure proper bed adhesion to prevent warping |
| BED_1.stl | Printable file | 3.6 MB STL | 2g $0.06 | 3g $0.06 | 6g $0.13 | Ensure proper bed adhesion to prevent warping |
| BED_2.stl | Printable file | 2.2 MB STL | 2g $0.05 | 2g $0.05 | 5g $0.11 | Ensure proper bed adhesion to prevent warping |
| BED_LINER.stl | Printable file | 3.7 MB STL | 2g $0.06 | 3g $0.06 | 6g $0.14 | Ensure proper bed adhesion to prevent warping |
| TAIL_LIGHT_R.stl | Printable file | 851.3 KB STL | 1g $0.03 | 1g $0.03 | 3g $0.07 | Ensure proper bed adhesion to prevent warping |
| TAIL_LIGHT_L.stl | Printable file | 772.6 KB STL | 1g $0.03 | 1g $0.03 | 3g $0.07 | Ensure proper bed adhesion to prevent warping |
| TAILGATE_.stl | Printable file | 2.8 MB STL | 2g $0.05 | 2g $0.06 | 5g $0.12 | Ensure proper bed adhesion to prevent warping |
| BUMPER_REAR.stl | Printable file | 300.4 KB STL | 1g $0.02 | 1g $0.02 | 2g $0.05 | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Tacoma/Taco V1
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
NOTE: Check out Toyota Taco V2. It is this same model but the vertical dimension is fully scale and it has been cut up to print more easily with less support. Inspired by 2017 Toyota Tacoma. Details: 313mm wheelbase. 223mm wide. 493mm long. (not including the rear bumper) No posts on the rear bumper yet. I figured we can all have fun figuring that out. Some supports are only in there to make is easier to print and glue up. They will need to be cut out.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
