Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Tacoma Antenna Mount/bezel
Description
My 2006 Toyota Tacoma's antenna bezel/mount was corroded under the rubber cover. I took a laser scan of the bezel just to 3D print a plastic one so the corrosion stops dripping onto the paint when it rains. The model is not perfect, as the scan didn't get into the crevices, but when I 3D printed it, I just took a drill bit and drilled out the hole to get rid of the imperfections. Also, be advised, the model does include the divots from the corrosion, because I scanned the corroded bezel, the model has those imperfections in it, but because the rubber casing goes over the bezel, I did not mind the divots.
Compatible Cars
Originally published on thingiverse.com by Eric Kozikowski (ekoziko) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
