Toyota Yaris rear wiper arm cap (2006-2009 Type II, Phase 1) - image

Files (1)

85292-0D020.stl

STL

696.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
85292-0D020.stl	Primary model	696.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Toyota Yaris rear wiper arm cap (2006-2009 Type II, Phase 1)

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a 3D printable version of the original Toyota Yaris rear wiper arm cap, original part number 85292-0D020. It should fit the 2006-2009 Yaris made in Japan. Probably some other models of Toyota/Toyota Yaris also. It's not an exact duplicate, but close enough. Clicks in place like the original.