12V Dodge Cigarette Lighter Trim - image

Files (1)

12vLighterTrimV2.stl

STL

265.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
12vLighterTrimV2.stl	Primary model	265.5 KB STL	Slice file	Slice file	Slice file	Print with the outer trim ring facing up for the best surface finish

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

12V Dodge Cigarette Lighter Trim

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

12V cigarette lighter trim for 2000-2002 dodge 2500. This trim holds the socket for the 12v plug into the dash. Mine had crumbled the same as all of my dash plastics and the cigarette lighter socket was left dangling. This part was not really designed around getting it back out once installed so I would recommend pushing the 12v socket into the trim, then plugging the wire into the socket before installing into dash. I printed with supports only from bed and printed with the outer trim ring facing up. Any questions feel free to ask in comments! Thanks.