Dodge Dakota 04 Front Middle Dashboard - image

Files (2)

dodge_middle_2_stl_high_Mesh_5.stl

STL

24.4 MB

savedata0_Mesh_9.stl

STL

13.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
dodge_middle_2_stl_high_Mesh_5.stl	Printable file	24.4 MB STL	Slice file	Slice file	Slice file	Ensure a stable and level print bed for accurate printing
savedata0_Mesh_9.stl	Printable file	13.1 MB STL	Slice file	Slice file	Slice file	Ensure a stable and level print bed for accurate printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Dodge Dakota 04 Front Middle Dashboard

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

There are other files but this is my first attempt at scanning the inside of my truck for a custom adapter to turn the stereo system into a touch enabled console like a Tesla. Unfortunately I wasn't able to get the entire vehicle since I didn't have a garage but I have pictures of what the rig looked like. There will be a youtube video explaining more about the hardware and what I was doing. The pictures of the mesh are a before and after the software stitches them together. This was done at low resolution on dark settings. I took probably about 20 captures. I could have done more if I had my desktop with me. I was only using half of an acer Iconia with an i5 and it was having some issues. So far I like the einscan-S. Now I need to figure out how to do pcbs and this thing will be awesome to scan things with.