Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Final_2.stl | Primary model | 448.8 KB STL | Slice file | Slice file | Slice file | Print with a brim for better adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
3000GT Stealth Dash Dim and Mirror Adj.
Shared by
3DPrintedCarPartDescription
This is a replacement design optimized for 3D printing to replace the bezel to the left of the steering wheel that holds the switch units for the dash board dimming switch and mirror adjusting switch. There is no decal like the original of a little light bulb, but there is a vent-like structure to show light regardless. Design is press-fit, and of course, I advise printing from ABS and then painted with UV resistant paint. I for one bondo'd the thing and sanded to a good finish.
Compatible Cars
Originally published on thingiverse.com by John Remmer (JohnRemmer) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
