Files (3)

Falcon_Door_Panel_LEFT.stl

STL

14.3 KB

Falcon_Door_Panel_RIGHT.stl

STL

14.3 KB

Ranchero_Door_Panel.stl

STL

138.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Falcon_Door_Panel_LEFT.stl	Choose left variant	14.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Falcon_Door_Panel_RIGHT.stl	Choose right variant	14.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Ranchero_Door_Panel.stl	Printable file	138.0 KB STL	Slice file	Slice file	Slice file	Check orientation and supports in your slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

1966 Ranchero Door Panel Emblem

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a modified door panel emblem in ABS for a 1966 Ford Ranchero or Falcon. THis has a Ranchero Logo, and there is a left and right for falcon but I have not test printed those. Correct 1 inch by 4 7/8 inch. You can see the original on the Left. The chrome is long gone.