Files (2)

Bronco_large.stl

STL

43.0 KB

Bronco_small.stl

STL

42.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Bronco_large.stl	Printable file	43.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports
Bronco_small.stl	Printable file	42.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

1986 Bronco Switch Plate Bezels

0 downloads289 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My youngest brother is rebuilding a 1986 Ford Bronco XLT. In his search for replacement parts, he found that he could not find any switch bezels for the power windows/locks that go on the doors. I decided to take a swing at it using the crumbling plastic originals that he had. He had the design professionally printed in metal, so I can only attest to their durability there. But he said that they were a perfect fit and only required a little in the ways of finishing touches. My models aren't the complete parts, because what I had to work with was, as previously mentioned, crumbling into ruin. So it seems like they are missing what would be little grabby claws to snap in. There are two models, the smaller one that fits just a single switch, and a larger one that fits a double switch.