Files (2)

ford-door-grommet.STEP

STEP

130.2 KB

ford-door-grommet.STL

STL

1.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU / PETG 20%	TPU / PETG 35%	100% solid	Recommendation
ford-door-grommet.STEP	Printable file	130.2 KB STEP	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion
ford-door-grommet.STL	Printable file	1.2 MB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Ford Expedition Door Grommet

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My door grommet was missing from my 2007 Ford Expedition EL XLT. I finally bought some TPU and this was an easy make. Hopefully it works for you. I uploaded the stl, solidworks native file, and a neutral step file if you want to make any changes.