Files (10)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| door_handle_.stl | Printable file | 852.9 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
| door_handle_3mf.3mf | Printable file | 253.3 KB 3MF | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
| door_handle_v2_.stl | Printable file | 10.1 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
| door_handle_v2_3mf.3mf | Printable file | 2.6 MB 3MF | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
| door_handle_v4.stl | Printable file | 9.0 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
| door_handle_v4_3mf.3mf | Printable file | 2.3 MB 3MF | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
| door_handle_v5_.stl | Printable file | 9.0 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
| door_handle_v5_3mf.3mf | Printable file | 2.1 MB 3MF | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
| door_handle_v5__repaired.stl | Printable file | 9.0 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
| door_handle_v5__repaired_3mf.3mf | Printable file | 1.5 MB 3MF | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal print quality |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
1993 Ford E350 Door Handles
Shared by
3DPrintedCarPartDescription
I recently Bought a used 1993 Ford E350, it didn't have any Door Handles. I went to local junk yard to pick up some handles and they wanted and arm and a leg for one, Went to ebay and same story. So i decided to make Temporary handles till i find some. This pattern is for Driver side door, to make Passenger door just Mirror in your Printer software. But these turned out so well i plan on Fine Tuning and making these Handles Perminate. Please stand by for updates. 3-22-2019: I've made a more durable handle which should cover up the door and hide the screw mounts. Finished up the Handle and This new Handle is stronger @ 35% infill compared to the original at 70% infill. I might do a more better looking handle but for now this is a good replacement handle till i either get new ones or redesign a new handle.
Compatible Cars
Originally published on thingiverse.com by Matt Palulis (tlmxcpmpp) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
