1997-2006 Jeep Wrangler Sun Visor Mount - image

Files (2)

97-06_Jeep_Visor_Mount_v1.step

STEP

86.5 KB

97-06_Jeep_Visor_Mount_v1.stl

STL

1.6 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 45%	100% solid	Recommendation
97-06_Jeep_Visor_Mount_v1.step	Mount / bracket	86.5 KB STEP	Slice file	Slice file	Slice file	Use a 0.1000 layer height for a smooth finish
97-06_Jeep_Visor_Mount_v1.stl	Mount / bracket	1.6 MB STL	Slice file	Slice file	Slice file	Use a 0.1000 layer height for a smooth finish

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

1997-2006 Jeep Wrangler Sun Visor Mount

0 downloads26 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Built for a friend who had been glueing his original back together every 3 months for 4 years. Print with ABS or Nylon (maybe PETG), 0.1000 layer height, and a 40-50% infill. ABS will shrink some and need a little reaming to open up the main hole. This has been used for 3 weeks with days time temps in the mid 90's. So far no problems.