2002-2006 Toyota Camry Cupholder Separator - image

Files (1)

Camry_Cupholder_MK_2_v1.stl

STL

342.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Camry_Cupholder_MK_2_v1.stl	Mount / bracket	342.5 KB STL	Slice file	Slice file	Slice file	Print with a horizontal orientation as designed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

2002-2006 Toyota Camry Cupholder Separator

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the factory part in order to function once the lid has been compromised. I have yet to try a lower resolution/higher infil print, but keep in mine it has to flex quite a bit to be slipped into the 2 mounting holes on either side of the cup holder lid properly. Designed to be printed horizontally.