2004 Ford Ranger AC Control Knob - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

2004 Ford Ranger AC Control Knob

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

THIS IS INTENDED FOR RESIN PRINTING, but may work with FDM. It has been tested to work with resin, but not with FDM. Replacement AC control knob for a 2004 Ford Ranger. May work with other years and models. I believe this will also work to replace the headlight knob. There is a port through the knob to let the backlight shine through for low-light visibility. I filled mine in with epoxy pigmented with white and green acrylic to match the other knobs. Also yes, the dashboard in the pic is filthy. Not my truck.