2005 Chevy Colorado Gas Cap Tether - image

Files (1)

Gas_Cap_Tether.stl

STL

11.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

18g

Based on 90% main infill across listed model files

Material cost

$0.44

Filament only at roughly $24/kg PETG / ASA

Print time

31m–52m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
Gas_Cap_Tether.stl	Cover / cap	11.6 KB STL	8g $0.20	18g $0.44	20g $0.47	Small functional file: print slowly; consider 100–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

2005 Chevy Colorado Gas Cap Tether

0 downloads265 views0 likes

Shared by

Alfred

Verified

Description

The other day I had mine break. When looking for another one here, I could not find one that fit my truck. This fits my 2005 Chev Colorado and should fit other Chevy/GMC models but I have no idea which ones it would fit. Please check the design of your part needed to see if it matches this part. (04-05 Colorado and Canyon "should" be compatible.) I printed it in ABS-R3 which is similar to nylon and other flexible filaments. I printed it at 100% infill because I wanted to make sure it was strong enough to last. It went on easy and should hold up for a while. If you know that it will fit your vehicle, please comment and I will include it in a follow up "Note" as they are added. I hope this works good for you as it is working great for me.