Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| GM_Battery_Hold_Down.stl | Primary model | 7.5 KB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Battery Hold Down 14005061 for GM vehicles (GMC, Chevrolet, Cadillac, Buick, Pontiac, Saturn, Hummer)
Shared by
Michael ChenDescription
GM Battery Hold Down 14005061 for a multitude of models including GMC, Chevrolet, Cadillac, Buick, Pontiac, Saturn, Hummer. I needed one for our 2004 Silverado, you might need it for a Sierra, Suburban, Tahoe, or maybe even a Corvette! Typically uses an M8 x 45mm hex-washer head bolt with a thread pitch of 1.25. If You make one please post it :).
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
