Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2011 mustang gt manual shift knob and polishing rod (M12 x 1.25)
Shared by
3DPrintedCarPartDescription
54mm diameter ball. A little larger than the stock knob and nicer for guys with large hands. Shift knob for manual 11 gt and threaded rod to stick in drill to sand and polish. This should fit all 10-14 mustangs.Maybe more? CHK your thread size first. thread size for this is M12 x 1.25 update: fixed a couple of fitment issues. It should be able to thread down passed where the threads end now and mate up with the leather boot a lot better. I took my measurements at night the first time and didnt account for that. for anyone that printed the first draft I was able to use mine by drilling out the first approx. 35mm of threads inside the knob,.
Compatible Cars
Originally published on thingiverse.com by Matt L (Matt19888) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
