Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Mustang_Shifter.stl | Primary model | 5.0 MB STL | Slice file | Slice file | Slice file | Ensure proper thread pitch for your specific Mustang model |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Shifter for 2018 Mustang 4 Cyl Turbo
Shared by
3DPrintedCarPartDescription
I decided I wanted a custom shifter for my Mustang so I made this one in Fusion 360. After several attempts and designs I finalized on this one. I like the way it feels better than the stock shifter. NOTE: I had a difficult time in finding what the proper thread pitch was on this shifter. Every site I went to including Mustang sites all say the threads are 12mm x 1.75 thread pitch. However from what I can deduce this is ONLY for the higher end models like the GT. I had to buy a thread pitch gauge to properly identify that the 4 Cyl Eco boost with Turbo is indeed a 12mm x 1.25 thread pitch. If you want to use this in a GT you might have to use a different sized lugnut or other solution. I have not tested this on any other model but mine. And quite frankly the 4 CYL turbo has 330 horses so MORE than enough for me.
Compatible Cars
Originally published on thingiverse.com by Joseph Giordano (Candor) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
