Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mustang Pony shifter knob (M12 X 1.75)
Shared by
3DPrintedCarPartDescription
Designed to fit a 99-04 5 speed but this should fit some others as well. Check your thread size and compare to know for sure. threads for this are M12 X 1.75. I printed mine at 101% scale to give the threads some clearance. You may need to do more or less depending on your settings. Generally 101 or 102% scale should work for most printers with correct settings. This should print fine without supports. No supports are needed for the threads.
Compatible Cars
Originally published on thingiverse.com by Matt L (Matt19888) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
