Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| S197_2013-14_shifter_sleeve_v1.stl | Primary model | 593.0 KB STL | 23g $0.54 | 25g $0.59 | 54g $1.29 | Ensure proper orientation in the slicer to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
S197 Mustang 2013-14 shifter sleeve
Shared by
3DPrintedCarPartDescription
This is a cover for the stick shift on a 2013 mustang when fitting the fake Aliexpress gear shifter knob. The lower doughnut clicks into the factory gaiter and should fit in a 66mm diameter shifter knob. The image shows it painted in silver when aerosol, due to the supports needed I think painting is best to cover any residue marks unless you wanna try buffing silk finish silver filament.
Compatible Cars
Originally published on thingiverse.com by Ian Bradshaw (shabbee) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
